Description
Holder for various sets of hex or Torx keys from Wera and PB Swiss. Optimized for use in toolchests or on workbenches. Lays out the keys in order so they can be easily grabbed and returned to their place. Far superior to the holders that come with the kits!
Holders for:
- Wera 73593 metric hex key set
The classic "rainbow" set of Wera metric hex keys, ranging from 1.5 to 10mm
240x120x20mm - appx 140g - Wera 22640 SAE (inch/imperial) hex key set
The SAE version of the above set, ranging from 5/64" to 3/8"
240x120x20mm - appx 140g - Wera 967/9 XL Torx set
Same long handles as the above sets, but in Torx ranging from T8-T40
240x120x20mm - appx 140g - Wera 967/9 Torx set
Shorter version of the Torx set -
PB Swiss 212LH-10 "rainbow" metric hex key set
237x100x15mm - appx 96g
Note that the holders for the first three Wera kits (with the long handles) are all the same outer dimensions so they will sit nicely next to each other in a toolchest. The other holders are sized as appropriate for the sets that they contain.
There are two configurations based on how you want to use them, and they can be turned around for a total of four configurations, which are detailed in the photos. Note that "B" is just a mirror of "A".
Configuration "A" - with the short legs pointing towards you, the cutout is on the right and the Wera text on the handles is upside down. Rotated, the cutout is on the left and the text is right side up.
Configuration "B" - with the short handles pointing towards you, the cutout is on the left and the Wera text on the handles is right side up. Rotated, the cutout is on the right and the text is upside down.
There are also cutouts on the underside into which you can press 20x3mm magnets to hold these in place when mounted in a steel drawer.